Front Fairing and wiring


Information and questions on GL1200 Goldwings (1984-1987)
Post Reply
sphen
Posts: 13
Joined: Thu Nov 07, 2019 9:48 am
Location: Deep South, USA
Motorcycle: 1986 GL1200 Aspencade

Front Fairing and wiring

Post by sphen » Tue Nov 19, 2019 11:46 am



So I've been looking over this project (see here viewtopic.php?f=5&t=53950)

My first order of business is to sort out some front end wiring. The PO unplugged everything and removed the front fairings after stuffing the wires in the pockets..

..I'm digging thru the OEM shop manual, but it's not overly detailed on physical layout. Can anyone give me a few hints - I'm mainly looking to figure out all of the LCD display wires. I've found 2 harnesses so far but not the third, and it's not clear where all of that actually plugs back onto the frame. IOW, I'm assuming all the wiring passes back thru the fairing and connects back to the main wire run, but i dont yet see where - there are no unoccupied harnesses on the frame.

I'm converting this to "naked", so i just need to isolate LCD, blinkers, and headlight. Admittedly I need to dig some more, but any helpful input appreciated.



Post Reply