Double side tape


Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
Ed Brock
Posts: 49
Joined: Wed Feb 27, 2019 11:45 am
Location: Oak Grove Or
Motorcycle: 1986 Suzuki Cavalcade GD
1998 1500 SE

Double side tape

Post by Ed Brock » Sun Nov 24, 2019 6:44 pm



Help!!
Some where (on this site??) I saw some information about a 3M double sided tape. There were 3 letters in the name. I think. Something like D-M. H
Does anyone have any information on this??
Thanks Ed



User avatar
Big Blue UK
Posts: 603
Joined: Mon Jan 21, 2013 2:18 pm
Location: Staffordshire UK
Motorcycle: GL1800 Monarch

Re: Double side tape

Post by Big Blue UK » Sun Nov 24, 2019 7:07 pm

You must be referring to 3M VHB. I use 4611 on all steel and plastic chromed trim and covers, only needs a bit.

Front crank cover



and side covers.


Last edited by Big Blue UK on Sun Nov 24, 2019 7:20 pm, edited 2 times in total.
If at first you don't succeed, hide the evidence.

User avatar
CrystalPistol
Posts: 894
Joined: Wed Mar 10, 2010 9:07 pm
Location: Shenandoah Valley of Virginia
Motorcycle: 1997 GL1500SE/'98 Lehman Trike

Re: Double side tape

Post by CrystalPistol » Sun Nov 24, 2019 7:10 pm

Big Blue UK wrote:
Sun Nov 24, 2019 7:07 pm
You must be referring to VHB
X2

I think it's called Very High Bond.
You can increase adheasion using a prep or primer they sell.
Amazon sells it. I've used it, once stuck it is stuck.

Maybe they'll develop a EHB ort Extremely High Bond?
Image

User avatar
C-dub
Posts: 438
Joined: Thu Aug 24, 2017 8:29 pm
Location: DFW, Texas
Motorcycle: 2016 Goldwing Audio/Comfort/Nav ABS
Previous bikes:
2005 Hayabusa
1999 Suzuki Bandit 1200S
1979 Suzuki GS850G
1983 Suzuki GS1100E
1981 Honda XL250
1975 Suzuki GT185M
1970 Suzuki TC90 dirtbike

Re: Double side tape

Post by C-dub » Sun Nov 24, 2019 9:23 pm

CrystalPistol wrote:
Sun Nov 24, 2019 7:10 pm

Maybe they'll develop a EHB ort Extremely High Bond?
Or UHB, Ultra High Bond. :mrgreen:
I am not and have never been a LEO. My avatar is in honor of my friend, Dallas Police Sargent Michael Smith, who was murdered along with four other officers in Dallas on 7.7.2016.

User avatar
AZgl1800
Posts: 1925
Joined: Thu Oct 30, 2008 2:46 pm
Location: Lake Oologah Indian Territory USA
Motorcycle: '02 GL1800

Re: Double side tape

Post by AZgl1800 » Sun Nov 24, 2019 10:00 pm

why order it?

Lowes and Home Depot both carry it.
~John
What is the Forum Index?
http://bit.ly/2GnjbzV

Download it here:
http://bit.ly/2SLDNqF

Ed Brock
Posts: 49
Joined: Wed Feb 27, 2019 11:45 am
Location: Oak Grove Or
Motorcycle: 1986 Suzuki Cavalcade GD
1998 1500 SE

Re: Double side tape

Post by Ed Brock » Sun Nov 24, 2019 11:14 pm

Thanks. Home depot! Great information.
We could get over the top with the acronyms. Maybe, TVB2WTEI. (the very best 2 way tape ever invented)
Ed

User avatar
WingAdmin
Site Admin
Posts: 20644
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer

Re: Double side tape

Post by WingAdmin » Sun Nov 24, 2019 11:29 pm

Yup, VHB is the stuff. I use it ALL the time - it basically stays put no matter what, and fastens things permanently - unless you want to remove it, in which case it is possible, with no goo or adhesive left behind. Love it!

https://www.amazon.com/3M-Heavy-Mountin ... ref=sr_1_1

I also use 3M Adhesion Promoter if I REALLY want something to stick. It increases the adhesion of the VHB tape.

Preparation is important: clean the surfaces to be bonded with rubbing alcohol first, to make sure there is no grease.

User avatar
CrystalPistol
Posts: 894
Joined: Wed Mar 10, 2010 9:07 pm
Location: Shenandoah Valley of Virginia
Motorcycle: 1997 GL1500SE/'98 Lehman Trike

Re: Double side tape

Post by CrystalPistol » Mon Nov 25, 2019 11:17 pm

We need a "LIKE" button. :D
Image

Ed Brock
Posts: 49
Joined: Wed Feb 27, 2019 11:45 am
Location: Oak Grove Or
Motorcycle: 1986 Suzuki Cavalcade GD
1998 1500 SE

Re: Double side tape

Post by Ed Brock » Wed Nov 27, 2019 8:28 pm

Requiring the comment that "we need a like button", I know I'm new to this site, but I found the like button. Just type in LIKE and push a button.
Happy Turkey Day folks.
Ed

User avatar
C-dub
Posts: 438
Joined: Thu Aug 24, 2017 8:29 pm
Location: DFW, Texas
Motorcycle: 2016 Goldwing Audio/Comfort/Nav ABS
Previous bikes:
2005 Hayabusa
1999 Suzuki Bandit 1200S
1979 Suzuki GS850G
1983 Suzuki GS1100E
1981 Honda XL250
1975 Suzuki GT185M
1970 Suzuki TC90 dirtbike

Re: Double side tape

Post by C-dub » Thu Nov 28, 2019 11:00 am

WingAdmin wrote:
Sun Nov 24, 2019 11:29 pm
Yup, VHB is the stuff. I use it ALL the time - it basically stays put no matter what, and fastens things permanently - unless you want to remove it, in which case it is possible, with no goo or adhesive left behind. Love it!

https://www.amazon.com/3M-Heavy-Mountin ... ref=sr_1_1

I also use 3M Adhesion Promoter if I REALLY want something to stick. It increases the adhesion of the VHB tape.

Preparation is important: clean the surfaces to be bonded with rubbing alcohol first, to make sure there is no grease.
That VHB tape is what came with the Innovv K2 cameras, right? How are they holding up? Did you use the adhesion promoter for those?
I am not and have never been a LEO. My avatar is in honor of my friend, Dallas Police Sargent Michael Smith, who was murdered along with four other officers in Dallas on 7.7.2016.

User avatar
WingAdmin
Site Admin
Posts: 20644
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer

Re: Double side tape

Post by WingAdmin » Fri Nov 29, 2019 11:33 am

C-dub wrote:
Thu Nov 28, 2019 11:00 am
WingAdmin wrote:
Sun Nov 24, 2019 11:29 pm
Yup, VHB is the stuff. I use it ALL the time - it basically stays put no matter what, and fastens things permanently - unless you want to remove it, in which case it is possible, with no goo or adhesive left behind. Love it!

https://www.amazon.com/3M-Heavy-Mountin ... ref=sr_1_1

I also use 3M Adhesion Promoter if I REALLY want something to stick. It increases the adhesion of the VHB tape.

Preparation is important: clean the surfaces to be bonded with rubbing alcohol first, to make sure there is no grease.
That VHB tape is what came with the Innovv K2 cameras, right? How are they holding up? Did you use the adhesion promoter for those?
I don't recall if the K2 came with VHB tape or not (it's been a year since I installed it). I know it came with mechanical mounts.

In any case, yes, I used VHB to mount the cameras (either supplied VHB, or what I already had on-hand, I don't recall). Neither camera has budged since I installed them, and yes, I did use adhesion promoter (definitely did not come with the kit - I keep some on-hand).



Post Reply