Tool to remove saddlebag release cable clips


Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
User avatar
Swagonmaster
Posts: 47
Joined: Sun Apr 16, 2017 3:30 pm
Location: Stokesdale, NC
Motorcycle: 1990 gl1500 SE

Tool to remove saddlebag release cable clips

Post by Swagonmaster » Wed Feb 12, 2020 12:44 pm



I am going to add an idea for removing the plastic four pronged saddlebags release cable clips. I used it a lot back when I was still turning wrenches for a living. The slot is only needed if you want to go around the cable but all you have to do is push the hole over the four pronged clip to compress all four at the same time and push the clip through as well.
Attachments






Try to learn from the mistakes of others..... you won't live long enough to make them all yourself!

User avatar
bellboy40
Posts: 646
Joined: Fri Nov 27, 2009 1:13 pm
Location: Brewton, AL
Motorcycle: 2000 GL1500SE Candy Spectra Red
1994 GL1500SE Pearl Bermuda Green

Re: Tool to remove saddlebag release cable clips

Post by bellboy40 » Thu Feb 13, 2020 2:01 pm

That's a cool idea! Thanks for sharing.

User avatar
guitarzan
Posts: 342
Joined: Sat Nov 08, 2014 7:20 pm
Location: Schererville, Indiana
Motorcycle: 1994 GL1500 SE

Re: Tool to remove saddlebag release cable clips

Post by guitarzan » Sat Feb 15, 2020 9:37 pm

That is a good idea, man I've split a finger nail more than once and it hurt so bad that I said two bad words.
Thank you for posting it.
USMC Purple Heart Combat Veteran MOS 0331 Machine Gunner Vietnam 70-71
Best site ever is right here.

User avatar
Swagonmaster
Posts: 47
Joined: Sun Apr 16, 2017 3:30 pm
Location: Stokesdale, NC
Motorcycle: 1990 gl1500 SE

Re: Tool to remove saddlebag release cable clips

Post by Swagonmaster » Sun Feb 16, 2020 8:44 am

I was reminded of it when I just had the bags off for a rear tire change and remembered the times that I didn't have that simple tool, as you said some "mechanics french" was said. Btw the hole in that tool is 11/32 and it helps if you chamfer the edge of the hole slightly.
Hope it helps everyone.
Try to learn from the mistakes of others..... you won't live long enough to make them all yourself!

User avatar
GlimWas
Posts: 160
Joined: Sun Apr 21, 2013 3:31 am
Location: Netherlands
Motorcycle: 1994 GL1500 SE Canada Edition, Carbon Candy Blue
2014 NC750X DCT
Contact:

Re: Tool to remove saddlebag release cable clips

Post by GlimWas » Sun Feb 23, 2020 1:02 pm

I just use a 5/6 mm washer.................... Does the trick too and no need for a 'tool'
Most motorcycle problems are caused by the nut that connects the handlebars to the saddle

GL1100 '80
GL1200 '87
GL1500 '94

User avatar
Swagonmaster
Posts: 47
Joined: Sun Apr 16, 2017 3:30 pm
Location: Stokesdale, NC
Motorcycle: 1990 gl1500 SE

Re: Tool to remove saddlebag release cable clips

Post by Swagonmaster » Sun Feb 23, 2020 1:07 pm

Also an excellent idea, l love homemade tools.
Try to learn from the mistakes of others..... you won't live long enough to make them all yourself!

User avatar
MikeB
Posts: 2693
Joined: Fri Dec 04, 2009 12:54 pm
Location: Tacoma, WA
Motorcycle: 1998 - GL1500 Aspencade.
2017 - GL1800 Audio Comfort
Contact:

Re: Tool to remove saddlebag release cable clips

Post by MikeB » Sun Feb 23, 2020 3:55 pm

I am totally confused. You guys are talking about saddlebag opener cable removal so you can remove the saddle bags right? Where is the "four pronged saddlebags release cable clips"? Is this the cable you are referring to?:


I have always just removed the nylon clip from the saddlebag opener rod and then extracted the cable barrel from the clip. What am I missing?
MikeB
Tacoma, WA, USA

User avatar
Swagonmaster
Posts: 47
Joined: Sun Apr 16, 2017 3:30 pm
Location: Stokesdale, NC
Motorcycle: 1990 gl1500 SE

Re: Tool to remove saddlebag release cable clips

Post by Swagonmaster » Sun Feb 23, 2020 6:51 pm

The cable is secured to the bag by a white plastic clip that has four prongs that can be aggravating to release all at once when you want to remove the cable. It can be done with pliers but something round and the correct size makes the job much easier.
Try to learn from the mistakes of others..... you won't live long enough to make them all yourself!

User avatar
MikeB
Posts: 2693
Joined: Fri Dec 04, 2009 12:54 pm
Location: Tacoma, WA
Motorcycle: 1998 - GL1500 Aspencade.
2017 - GL1800 Audio Comfort
Contact:

Re: Tool to remove saddlebag release cable clips

Post by MikeB » Sun Feb 23, 2020 7:34 pm

Ahh..okay. the light just came on.


I had forgotten about that little clip. Been a few months since I had to remove the saddlebag.
MikeB
Tacoma, WA, USA

gford
Posts: 69
Joined: Fri Feb 10, 2012 8:55 pm
Location: Canada
Motorcycle: 1999 Goldwing SE

Re: Tool to remove saddlebag release cable clips

Post by gford » Sun Feb 23, 2020 8:45 pm

Never ever had a problem releasing that four prong fastener with just my fingers and didn't even split a fingernail, LOL



Post Reply