Rebuilding Rear Brake Master cylinder need push rod


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
mgwaddell
Posts: 2
Joined: Wed May 21, 2014 11:14 am
Location: DeWitt, MI
Motorcycle: 1982 GL1100 Interstate

Rebuilding Rear Brake Master cylinder need push rod

Post by mgwaddell » Mon May 11, 2020 6:49 pm



I'm rebuilding my '81 GL1100 rear master cylinder. A would like to get a used/new pushrod that is no longer made/available. Any ideas as to a grate salvage yard or private seller for vintage GL's? Also, any advice on a subpart that will fix and work?

Mike



utenka
Posts: 5
Joined: Mon May 04, 2020 2:00 am
Location: United States
Motorcycle: 1983 gl1100 interstate, 2001 suzuki VL1500 LC, 1980 KZ750 LTD-4 , 1985 454LTD

Re: Rebuilding Rear Brake Master cylinder need push rod

Post by utenka » Mon May 11, 2020 11:59 pm

this is as close as i could find, is that little bit what you are looking for?

https://www.ebay.com/itm/82-Honda-GL-11 ... SwRuVbM4M5

mgwaddell
Posts: 2
Joined: Wed May 21, 2014 11:14 am
Location: DeWitt, MI
Motorcycle: 1982 GL1100 Interstate

Re: Rebuilding Rear Brake Master cylinder need push rod

Post by mgwaddell » Tue May 12, 2020 7:52 am

Thank you very much. I have researched all of e-bay as of 5/11/2020 and have found nothing. The one you provide has a push rod that is not long enough. The one I need is part # 43530-463-006 approx. 3 inches.-
God Bless for you efforts.

Mike

Post Reply