GL1500 SE 1996 Fuse #2 Blows


Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
rbuchen
Posts: 3
Joined: Mon May 21, 2012 4:29 pm
Location: Farmington, NH
Motorcycle: 1996 GL1500SE

GL1500 SE 1996 Fuse #2 Blows

Post by rbuchen »



Number 2 fuse blows when the key is turned on. I trouble shot and found when I unplug the 8 pin connector just above the left fan, the fuse will not blow when the key is turned on. Looking for ideas on how to trouble shoot the connector, what wires go where into the left handlebar controls and what continuity should be on the pins.



User avatar
gipsy42
Posts: 132
Joined: Sat Jun 12, 2010 8:58 pm
Location: Villa Adelina, Bs.As. Argentina
Motorcycle: 1993 GL1500 SE
1978 GL1000
Contact:

Re: GL1500 SE 1996 Fuse #2 Blows

Post by gipsy42 »

#2 fuses are for horn, Stop RElay, Turn signal relay


Mario
aka Gipsy42
And still riding...
I just regrets the things I haven't done.

http://www.surfcam.com.ar
http://www.cre-angeles.org.ar

User avatar
gipsy42
Posts: 132
Joined: Sat Jun 12, 2010 8:58 pm
Location: Villa Adelina, Bs.As. Argentina
Motorcycle: 1993 GL1500 SE
1978 GL1000
Contact:

Re: GL1500 SE 1996 Fuse #2 Blows

Post by gipsy42 »

I use this gadgets to find a short or heavy loaded circuit; made from two spade terminals, piece of cooper wire, clear epoxy. Inserted in the fuse holder, and the lamp beween the terminals it will show a short sparing fuses.
I hope this helps.
Mario




Mario
aka Gipsy42
And still riding...
I just regrets the things I haven't done.

http://www.surfcam.com.ar
http://www.cre-angeles.org.ar

Post Reply