Low beam not working

Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
Posts: 44
Joined: Thu Aug 22, 2019 9:09 pm
Location: Fort Scott, KS
Motorcycle: 1983 GL1100I

Low beam not working

Post by bofler »

Fired up the bike today and noticed that the low beam isn't working. If I switch to hi beam it comes on. All other electrics are fine.

Should I just get a new bulb or is there something else that could be the problem that I need to look at?

Posts: 52
Joined: Fri Aug 10, 2018 9:16 pm
Location: Edmond, KS
Motorcycle: 1982 GL1100 Aspencade

Re: Low beam not working

Post by nwkwinger »

My first guess would be the bulb. Before you spend any money, even on a bulb, why don't you test it out? Turn on the headlight, unplug the bulb, and test for power to the plug on both high and low beams. Your plug will have three slots where the prongs on the bulb plug in. One of these is ground, one has power on high beam, one has power for low beam. If you have power on both wires, you need a new bulb. If you only have power on one wire, you will need to start tracing the power backward from the plug.

Post Reply